|Availability:||In stock (4)|
CHANGEABLE OPEN TOE FOOT
(for Interchangeable Dual Feed)
Compatibility for group: 5 6 7
Not for sewing machines:
EMERALD™ 122, 118 and 116 machines,
EDEN ROSE™ 250M, TRIBUTE™ 140M.
The Interchangeable Dual Feed with Changeable Presser Feet
is designed to feed layers of fabric and/or batting evenly. It is
perfect for quilting, sewing velvet, some stretch fabrics, imitation
leathers and fabrics which need accurate pattern matching. Use
the Changeable Open Toe Foot when sewing Satin stitch applique,
Taper stitches and Decorative stitches. The tunnel on the
underside of the foot feeds smoothly and the open front gives
greater visibility and a great overview of the stitches.
1. Attach the Interchangeable Dual Feed to your machine:
a. Remove the presser foot ankle by unscrewing the ankle screw.
b. Place the Interchangeable Dual Feed onto your machine from the back, positioning
the fork over the needle clamp screw. Screw the Interchangeable Dual Feed onto
the presser foot bar with the presser foot ankle screw.
c. With presser foot bar in the up position, place the Changeable Open Toe Foot under
the Interchangeable Dual Feed.
2. Push the Changeable Open Toe Foot upwards so that it snaps into place.
3. Choose a decorative or a satin stitch.
4. Sew. The red markings on the foot will help you guiding the fabric as you sew.