DESCRIPTION INSTANT-ER is a six-way action liquid product that 1) penetrates, 2) lubricates, 3) displaces moisture, 4) helps prevent corrosion, 5) protects surfaces and 6) cleans. As a penetrant, INSTANT-ER quickly works itself into mechanical parts frozen by corrosion. The lubricating oil leaves a film that reduces friction, stops squeaks and frees sticking parts. INSTANT-ER displaces and seals out moisture on electrical equipment to help prevent electrical shorts and current leakage caused by moisture. INSTANT-ER inhibits metal corrosion by adhering to wet or dry metal surfaces that are exposed to corrosive conditions. Helps protect electrical gear, metal and other surfaces from deterioration due to harsh environments. INSTANT-ER cleans surfaces to allow better penetration. INSTANTER is formulated without chlorinated solvents to be nonflammable, nonconductive and harmless to most rubber, plastics and paint. INSTANT-ER saves downtime and costly repairs while keeping parts and equipment running smoother, longer and more efficiently.
FEATURES
• Environmentally Responsible (ER) • No Chlorinated Solvents (1,1,1-Trichloroethane, Trichloroethylene, Perchloroethylene, Methylene Chloride) • Quick Penetrant • Lubricant • Moisture Displacement • Corrosion Inhibitor • Protectant DIRECTIONS EQUIPMENT and PARTS • Before taking equipment apart, spray with INSTANT-ER. • Lightly tap joint and allow a few seconds for penetration. • For heavy corrosion, repeat application. • Cleaner • Nonconductive • Removes Grease & Oil • Saves Downtime • Aerosol or Bulk • Restores Flooded Electrical Equipment • Nonflammable • High Dielectric Strength up to 39,000 Volts • Starts Wet Engines - Spray Distributor Cap to “Dry Out” Parts • Before re-assembling parts, spray with INSTANT-ER, making re-assembly easier and to prevent re-rusting, corrosion and binding. ELECTRICAL SYSTEM • Spray directly into electric motor, or spray over all wiring, coil, spark plugs and distributor. • INSTANT-ER drives out moisture and water. • Moisture will be forced out and spark or contact will be restored.
CLEAN and PROTECT • Spray liberally onto dirt and scale. Remove loosened scale then re-apply to leave a never-dry protective film. To ensure adequate protection reapply periodically. NOTE: Easily removed with TRI-SUB, J-88 or TECH-SOLV. APPLICATIONS Nuts, Bolts, Manifolds, Mufflers, Heat Risers, Linkages, Cables, Tie-Rod Connections, Locks, Hinges, Rotors, Motors, Commutators. Doors, Brake Pedals, Controls, Carburetor Linkage, Distributor Caps, Seat Channels. Windows, Frozen Parts, Air Conditioning Louvers, Dampers, Battery Terminals, Cables, Garage Door Rails, Metal Rollers, Marine Equipment, Antennas, Vending Machine Equipment, Conveyors, Starters, Switches, Generators, Batteries, Electrical Components, Contacts, Relays, Sparkplugs. Coils, Windings, Wiring, Fuses and Circuit Boxes.
TECHNICAL DATA State: Liquid Flash Point: (Bulk) 98°C (209°F) by Tag Closed Cup; Nonflammable by definition Water Displacing Ability: Excellent Dielectric Strength: 39,000 (Avg.) ASTM D-877 PRECAUTIONS Aerosol: Compressed gas. Contents under pressure. Do not puncture or incinerate container. Aerosol and Bulk: Eye Irritant. Vapour harmful. Harmful or fatal if swallowed. PRECAUTIONS: Avoid contact with eyes and skin. Use in a well-ventilated area. Aerosol cans heated above 49°C may burst. Keep from open flame. Wear rubber gloves and eye protection. Wash thoroughly after handling. KEEP OUT OF THE REACH OF CHILDREN. FIRST AID: If in contact with eyes, immediately flush with water for 15 minutes. Call a physician if irritation persists. If ingested, do not induce vomiting. Contact physician immediately. If in contact with skin, flush with water. Call a physician if irritation develops. READ THE MATERIAL SAFETY DATA SHEET (MSDS) BEFORE USING THIS PRODUCT.
GUARANTEE Cantol guarantees its products, when used as directed, to do all it claims. Should the product fail to demonstrate our claims, the remaining material may be returned to us and no charge will be made.
DESCRIPTION INSTANT-ER is a six-way action liquid product that 1) penetrates, 2) lubricates, 3) displaces moisture, 4) helps prevent corrosion, 5) protects surfaces and 6) cleans. As a penetrant, INSTANT-ER quickly works itself into mechanical parts frozen by corrosion. The lubricating oil leaves a film that reduces friction, stops squeaks and frees sticking parts. INSTANT-ER displaces and seals out moisture on electrical equipment to help prevent electrical shorts and current leakage caused by moisture. INSTANT-ER inhibits metal corrosion by adhering to wet or dry metal surfaces that are exposed to corrosive conditions. Helps protect electrical gear, metal and other surfaces from deterioration due to harsh environments. INSTANT-ER cleans surfaces to allow better penetration. INSTANTER is formulated without chlorinated solvents to be nonflammable, nonconductive and harmless to most rubber, plastics and paint. INSTANT-ER saves downtime and costly repairs while keeping parts and equipment running smoother, longer and more efficiently.
FEATURES
• Environmentally Responsible (ER) • No Chlorinated Solvents (1,1,1-Trichloroethane, Trichloroethylene, Perchloroethylene, Methylene Chloride) • Quick Penetrant • Lubricant • Moisture Displacement • Corrosion Inhibitor • Protectant DIRECTIONS EQUIPMENT and PARTS • Before taking equipment apart, spray with INSTANT-ER. • Lightly tap joint and allow a few seconds for penetration. • For heavy corrosion, repeat application. • Cleaner • Nonconductive • Removes Grease & Oil • Saves Downtime • Aerosol or Bulk • Restores Flooded Electrical Equipment • Nonflammable • High Dielectric Strength up to 39,000 Volts • Starts Wet Engines - Spray Distributor Cap to “Dry Out” Parts • Before re-assembling parts, spray with INSTANT-ER, making re-assembly easier and to prevent re-rusting, corrosion and binding. ELECTRICAL SYSTEM • Spray directly into electric motor, or spray over all wiring, coil, spark plugs and distributor. • INSTANT-ER drives out moisture and water. • Moisture will be forced out and spark or contact will be restored.
CLEAN and PROTECT • Spray liberally onto dirt and scale. Remove loosened scale then re-apply to leave a never-dry protective film. To ensure adequate protection reapply periodically. NOTE: Easily removed with TRI-SUB, J-88 or TECH-SOLV. APPLICATIONS Nuts, Bolts, Manifolds, Mufflers, Heat Risers, Linkages, Cables, Tie-Rod Connections, Locks, Hinges, Rotors, Motors, Commutators. Doors, Brake Pedals, Controls, Carburetor Linkage, Distributor Caps, Seat Channels. Windows, Frozen Parts, Air Conditioning Louvers, Dampers, Battery Terminals, Cables, Garage Door Rails, Metal Rollers, Marine Equipment, Antennas, Vending Machine Equipment, Conveyors, Starters, Switches, Generators, Batteries, Electrical Components, Contacts, Relays, Sparkplugs. Coils, Windings, Wiring, Fuses and Circuit Boxes.
TECHNICAL DATA State: Liquid Flash Point: (Bulk) 98°C (209°F) by Tag Closed Cup; Nonflammable by definition Water Displacing Ability: Excellent Dielectric Strength: 39,000 (Avg.) ASTM D-877 PRECAUTIONS Aerosol: Compressed gas. Contents under pressure. Do not puncture or incinerate container. Aerosol and Bulk: Eye Irritant. Vapour harmful. Harmful or fatal if swallowed. PRECAUTIONS: Avoid contact with eyes and skin. Use in a well-ventilated area. Aerosol cans heated above 49°C may burst. Keep from open flame. Wear rubber gloves and eye protection. Wash thoroughly after handling. KEEP OUT OF THE REACH OF CHILDREN. FIRST AID: If in contact with eyes, immediately flush with water for 15 minutes. Call a physician if irritation persists. If ingested, do not induce vomiting. Contact physician immediately. If in contact with skin, flush with water. Call a physician if irritation develops. READ THE MATERIAL SAFETY DATA SHEET (MSDS) BEFORE USING THIS PRODUCT.
GUARANTEE Cantol guarantees its products, when used as directed, to do all it claims. Should the product fail to demonstrate our claims, the remaining material may be returned to us and no charge will be made.