0
Settings
Language
Currency
20oz double-wall vacuum insulated stainless steel sublimation tumbler with LED temperature display lid
Heat Press Instructions:
MUG PRESS INSTRUCTIONS
Set the temperature to 365°F.
Remove the lid.
Tape the transfer onto the bottle using heat-resistant tape.
Wrap heat-conductive rubber at room temperature (HCR-18610) around the transfer and the bottle, making sure the transfer is properly positioned.
Note: After using the green rubber once and it has heated up, reduce pressing time by 30 seconds for subsequent uses.
Press. After 2 minutes, check a corner to see if the image is fully sublimated. If not, rotate the bottle a quarter turn and press for an additional 45 seconds.
Remove from the press, peel off the transfer, and allow to cool.
20oz double-wall vacuum insulated stainless steel sublimation tumbler with LED temperature display lid
Heat Press Instructions:
MUG PRESS INSTRUCTIONS
Set the temperature to 365°F.
Remove the lid.
Tape the transfer onto the bottle using heat-resistant tape.
Wrap heat-conductive rubber at room temperature (HCR-18610) around the transfer and the bottle, making sure the transfer is properly positioned.
Note: After using the green rubber once and it has heated up, reduce pressing time by 30 seconds for subsequent uses.
Press. After 2 minutes, check a corner to see if the image is fully sublimated. If not, rotate the bottle a quarter turn and press for an additional 45 seconds.
Remove from the press, peel off the transfer, and allow to cool.